-
Plaid Tidings Class by Mail
September 2020’s Class by Mail featured four card designs using Stampin’ Up!’s Plaid Tidings suite.
Use the video below or the written instructions linked here to get all the information you need (including supply lists with measurements) for making these card designs.
Also, check out my Pinterest board with lots of fun ideas using the Plaid Tidings suite.
Supplies
-
Playful Pets Class by Mail
August 2020’s Class by Mail featured three card designs (including a fun fold design) using Stampin’ Up!’s Playful Pets suite.
Use the video below or the written instructions linked here to get all the information you need (including supply lists with measurements) for making these three card designs.
Also, check out my Pinterest board with lots of fun ideas using the Playful Pets suite.
Supplies
-
Flowers for Every Season Class by Mail
July 2020’s Class by Mail featured three card designs (including a fun fold design) using Stampin’ Up!’s Flowers for Every Season suite.
Use the video below or the written instructions linked here to get all the information you need (including supply lists with measurements) for making these three card designs.
Also, check out my Pinterest board with lots of fun ideas using the Jar of Flowers bundle.
Supplies
-
In Good Taste Class by Mail
June 2020’s Class by Mail featured three card designs (including a fun fold design) using Stampin’ Up!’s In Good Taste suite.
Use the video below or the written instructions linked here to get all the information you need (including supply lists with measurements) for making these three card designs.
Also, check out my Pinterest board with lots of fun ideas using the In Good Taste suite.
Supplies
-
Ornate Garden Class by Mail
May 2020’s Class by Mail features three card designs (including a fun fold design) using Stampin’ Up!’s Ornate Garden suite.
Use the video below or the written instructions linked here to get all the information you need (including supply lists with measurements) for making these three card designs.
Also, check out my Pinterest board with lots of fun ideas using the Ornate Garden suite.
Supplies
-
Floral Free as a Bird Friendship Card
I’m part of a monthly swap group, and I absolutely love designing new cards each month and receiving others’ designs. In May, we wanted to make sure to use Stampin’ Up! items that would be available once the new catalog goes live on June 3 so that our designs could be replicated. I hadn’t received my pre-order of new catalog items yet, so I went back to my carryover stamp sets and was drawn to the floral images in the Free As a Bird set. I added in some Stampin’ Blends, ribbon, and plenty of Pearl Basic Jewels to finish off this design!
Card Tutorial
Stamp with Tuxedo Black Memento Ink
1. Randomly stamp floral and leaf images from Free As a Bird stamp set on Whisper White cardstock measuring 5 1/2" x 3".
2. Stamp "Your friendship means the world to me" on 1 1/2" strip of Whisper White cardstock.
3. Stamp "Thanks for being you" and floral image on Whisper White cardstock measuring 5 1/4" x 4". This will be the inner panel of the card. OPTIONAL: Stamp flowers on envelope.
Color
4. Use Stampin’ Blends to color the stamped images on the 5 1/2″ x 3 ” cardstock and 5 1/4″ x 4″ card insert (and envelope, if you chose to stamp it). I used the Dark Petal Pink, Light and Dark Mossy Meadow, and Light and Dark Rich Razzleberry. I think Blackberry Bliss in place of the Rich Razzleberry would also look great!
Coloring Tips: for the large flowers, I started with the dark color in the center, then used the light Stampin’ Blend to color to the edges. I prefer dark first, then light for blending. For the leaves, I colored the whole leaves using the light shade, then went back with the finer, bullet-tip dark color to add some lines along the leaf veins.
Tip for coloring on envelope: the Stampin’ Blends bleed through easily. When coloring the envelope, I slid a piece of scrap cardstock inside just in case it bled through the first layer of envelope.
Punch
5. Use the Label Me Fancy punch to punch out the stamped greeting (on 1 1/2″ Whisper White strip) and a Petal Pink punch.
6. Using a Paper Snips, cut the Petal Pink punched cardstock in half vertically.Use the adhesive of your choice to adhere these halves to the left and right of the punched greeting.
Assemble
7. Use a Bone Folder to fold a Petal Pink card base (11″ x 4 1/4″, scored at 5 1/2″) in half.
8. Adhere stamped panel to inside of card.
9. Adhere Blackberry Bliss cardstock measuring 5 1/2″ x 3 1/4″ to the center of the card front. Use Paper Snips to trip any excess.
10. Adhere stamped Whisper White panel to the Blackberry Bliss, again trimming any excess.
11. Use Mini Glue Dots to attach 3-4″ of Petal Pink 5/8″ Organdy Striped Ribbon to the back of the punched tag. Trim the ribbon ends at a diagonal.
12. Use Stampin’ Dimensionals to attach the punched greeting and ribbon to the card front. I centered it from left to right but placed it higher up on the card.
13. Add Pearl Basic Jewels to the flower centers to finish off the card.
I hope you enjoyed this card design! I’ve linked all the supplies I used below, and you can order them by clicking the supply images or selecting “Place a Stampin’ Up! Order” along the top of the screen.
Product List
-
Sailing Home Sampler
About a year ago, as I was wrapping up my dissertation to complete my Ph.D., I was brainstorming gift ideas for my advisor. In addition to supporting me academically in so many ways throughout grad school, she and I traveled the world together presenting our STEM education research and working with teachers. In less than four years, we traveled together to Australia, Japan (several times), South Korea, Taiwan, Italy, Finland, and numerous cities within the U.S. What kind of gift do you give someone who has played such a significant role in your life? A hand-made gift, of course! I love the nautical theme of Stampin’ Up’s Come Sail Away suite, and the Memories & More card that says, “What is life but a grand adventure” was the perfect sentiment. I designed this 12×12 sampler, then framed and gifted it to my advisor.
Although the stamps and dies will be carrying over into the 2020-2021 catalog, the Designer Series Paper I used for this sampler is now listed as a Last-Chance product. This means it’s only available until June 2 or while supplies last! In addition, some of the other items (Come Sail Away Memories & More Cards, Sail Away Trinkets, Metallic Brads, Baker’s Twine, and Magnolia Lane Ribbon) are retiring and on the clearance rack, so now is a great time to buy them at a discount if you’re interested in completing this project!
Sampler Tutorial
1. Cut Cardstock, Designer Series Paper, and Memories & More Cards
There are three sets of layering sizes that make up this sampler. Each basic card element is composed of three layers: Night of Navy cardstock as the largest, Sahara Sand cardstock as the middle, and either Come Sail Away Designer Series Paper or a Memories & More card for the smallest. Cut these elements first.
Central Piece – What is Life but a Grant Adventure (cut one of each size)
- Night of Navy: 6 1/2″ x 4 1/2″
- Sahara Sand: 6 1/4″ x 4 1/4″
- Memories & More Card: 6″ x 4″
Side Pieces to Left and Right of Center (cut two of each size)
- Night of Navy: 4 1/2″ x 2″
- Sahara Sand: 4 1/4″ x 1 3/4″
- Designer Series Paper: 4″ x 1 1/2″
Pieces Lining Top and Bottom (cut six of each size)
- Night of Navy: 3 1/2″ x 3 1/8″
- Sahara Sand: 3 1/4″ x 2 7/8″
- Designer Series Paper/Memories & More Card: 3″ x 2 5/8″
2. Stamp Images
Use Night of Navy ink to stamp a lighthouse and the larger sailboat on Whisper White cardstock.
Use Soft Suede ink to stamp the smaller sailboat, a compass, and an anchor on Whisper White cardstock.
3. Die Cut Stamped Images and Additional Shapes
Use the Smooth Sailing Dies to cut the stamped anchor, sailboats, and lighthouse. In addition, cut:
- Soft Suede rope
- Soft Suede ship’s wheel
- Soft Suede compass needle (small)
- Sahara Sand compass needle (large)
- Night of Navy seaweed
- Balmy Blue seaweed
Use the Layering Circles Dies to cut the compass and two Night of Navy circles.
4. Assemble Each Component
Use the close-up images below to assemble the components. Make sure to pay attention to where the ribbon/twine is placed, often just around the first layer.
I used a variety of Tear & Tape, Snail adhesive, Glue Dots, and Multipurpose Liquid Glue. If you are planning to frame this in a frame with glass, I do not recommend using Stampin’ Dimensionals, as they will just get flattened in the frame.
PreviousNext5. Adhere Components to 12″ x 12″ Designer Series Paper (DSP)
I would recommend first placing the 12×12 DSP in your frame and marking the DSP with a pencil at the edge of the frame so you know how much of it will be showing. Next, place the central component, using a ruler to ensure that it is perfectly centered from top to bottom and left to right. I used Tear & Tape adhesive for securing these components because I wanted it to be very strong.
Add the two side pieces to the left and right of the central component. Make sure to align them with the central component at the top and bottom, and center them between the central component and where you marked the edge of the frame.
Finally, add the six additional components on the top and bottom. I recommend starting with the one in the middle, making sure it is perfectly centered to the left and right of the 12×12 DSP and centered between the top of the central component and where you marked the edge of the frame. Once the middle piece is in place, the two side components are easy – just make sure to line them up along the top with the piece you just placed and to the side of the already placed pieces.
I hope you enjoyed this design! I’ve linked all the supplies I used below, and you can order them by clicking the supply images or selecting “Place a Stampin’ Up! Order” along the top of the screen.
Night Of Navy 3/8″ (1 Cm) Corduroy Ribbon[145597]$8.00
-
Parisian Thank You
I was immediately drawn to the Parisian Blossoms suite of Stampin’ Up! products. The champagne foil elements on the Parisian Blossoms Specialty Designer Series Paper, the gorgeous dies, a great color combination… what’s not to love! I tried to resist purchasing the set, but after five of my planned trips (Portland, San Francisco, Arizona, Vancouver, and Montreal) were cancelled due to COVID-19, I decided a little travel nostalgia was in order.
My now-husband and I visited Paris together in 2010, when we had only been dating for about four months. Looking back, I can’t believe we dove into traveling together in such a big way, but our separate European study abroad trips happened to align, with his concluding and mine having a long break at the same exact time. We independently traveled to Paris, met up in the airport, and proceeded to explore the city together. Being college students, we did everything “on the cheap,” but it was still an amazing trip. The Eiffel Tower is stunning, and we definitely want to visit again some day!
The stamps, dies, and Designer Series Paper I use for this card are now listed as Last-Chance products. This means they’re only available until June 2 or while supplies last!
Card Tutorial
Prep Card Base
1. Cut 8 1/2" x 5 1/2" Petal Pink cardstock. Score at 4 1/4".
2. Using the Paper Trimmer, cut a 1" chunk out from the top and bottom of the card front. Make sure to cut only to the score line, as shown.
Die Cutting
3. Die cut an Eiffel Tower out of Basic Black cardstock measuring approximately 5″ x 3″.
4. Die cut “merci” out of Basic Black cardstock measuring approximately 2 3/4″ x 5/8″. Make sure to save the small circle for the “i”!
5. Die cut the flourish out of Pool Party cardstock measuring 2 3/4″ x 1 3/4″.
Stamping
6. Use Petal Pink ink to stamp the flourish at the top of Whisper White cardstock measuring 4″ x 3 1/4″.
Assembly
7. Use a bone folder to fold the Petal Pink card base in half.
8. With card closed, use Snail adhesive to adhere two pieces of Parisian Blossoms Specialty DSP measuring 4″ x 7/8″ to the top and bottom. NOTE: Use the top and bottom of the card front to guide your placement. There should be NO space between the top/bottom of the card front and the DSP.
9. Use Snail adhesive to adhere a piece of Parisian Blossoms Specialty DSP measuring 4″ x 3 1/4″ to card front.
10. Use Multipurpose Liquid Glue to adhere die cut Eiffel Tower to card front. NOTE: Make sure you don’t apply glue to the top or bottom portions of the Eiffel Tower, where it will hang off the card front.
11. Use the Detailed Trio punch to round the corners of a piece of Pool Party cardstock measuring 2 3/4″ x 5/8″.
12. Use Multipurpose Liquid Glue to adhere “merci” to the Pool Party cardstock.
13. Use Stampin’ Dimensionals to secure the die cut flourish to the back of the “merci” and Pool Party assembly. Add additional Dimensionals, and secure this whole assembly to the card front.
I hope you enjoyed this card design! I’ve linked all the supplies I used below, and you can order them by clicking the supply images or selecting “Place a Stampin’ Up! Order” along the top of the screen.
-
Birthday Bonanza Class by Mail
April 2020’s Class by Mail features three card designs (including a buckle fold design) using the Birthday Bonanza suite.
Use the video below or the written instructions linked here to get all the information you need (including supply lists with measurements) for making these three card designs.
Also, check out my Pinterest board with lots of fun ideas using the Birthday Bonanza suite.
Supplies
-
Timeless Tulips Class by Mail
March 2020’s Class by Mail featured three card designs (including a fun fold design) using the Timeless Tulips bundle.
Use the video below or the written instructions linked here to get all the information you need (including supply lists with measurements) for making these three card designs.
Also, check out my Pinterest page with lots of ideas using the Timeless Tulips bundle.
Supplies
